dcr2950w65 phase control thyristor ds5871 - 4 a pril 2013 (ln 30265 ) 1 / 10 www.dynexsemi.com features ? double side cooling ? high surge capability applications ? high power drives ? high voltage power supplies ? static switches voltage ratings part and ordering number repetitive peak voltages v drm and v rrm v conditions dcr2950w65* dcr2950w60 dcr2950w55 DCR2950W50 6500 6000 5500 5000 t vj = - 40 c to 125 c, i drm = i rrm = 300ma, v drm , v rrm t p = 10ms, v dsm & v rsm = v drm & v rrm + 100v respectively lower voltage grades available. * 6200v @ - 40 0 c, 6500v @ 0 0 c ordering information when ordering, select the required part number shown in the voltage ratings selection table. for example: dcr2950w65 note: please use the complete part number when ordering and quote this number in any future correspondence relating to your order. key parameters v drm 6500v i t(av) 2945a i tsm 38500a dv/dt* 1500v/s di/dt 300a/s * higher dv/dt sele ctions available outline type code: w (see package details for further information) fig. 1 package outline
semiconductor dcr2950w65 2 / 10 www.dynexsemi.com current ratings t case = 60 c unless stated otherwise symbol parameter test conditions max. units double side cooled i t(av) mean on - state current half wave resistive load 2945 a i t(rms) rms value - 4629 a i t continuous (direct) on - state current - 4430 a surge ratings symbol parameter test conditions max. units i tsm surge (non - repetitive) on - state current 10ms half sine, t case = 125 c 38.85 ka i 2 t i 2 t for fusing v r = 0 7.55 ma 2 s thermal and mechanical ratings symbol parameter test conditions min. max. units r th(j - c) thermal resistance C junction to case double side cooled dc - 0.00631 c/w single side cooled anode dc - 0.01115 c/w cathode dc - 0.01453 c/w r th(c - h) thermal resistance C case to heatsink clamping force 76.0kn double side - 0.0014 c/w (with mounting compound) single side - 0.0028 c/w t vj virtual junction temperature blocking v drm / vrrm - 125 c t stg storage temperature range - 55 125 c f m clamping force 68.0 84.0 kn
semiconductor dcr2950w65 3 / 10 www.dynexsemi.com dynamic characteristics symbol parameter test conditions min. max. units i rrm /i drm peak reverse and off - state current at v rrm /v drm , t case = 125 c - 300 ma dv/dt max. linear rate of rise of off - state voltage to 67% v drm , t j = 125 c, gate open - 1500 v/s di/dt rate of rise of on - state current from 67% v drm to 2x i t(av) repetitive 50hz - 150 a/s gate source 30v, 10 ? , non - repetitive - 300 a/s t r < 0.5s, t j = 125 c v t(to) threshold voltage C low level 500 to 2400a at t case = 125 c - 0.94 v threshold voltage C high level 2400 to 72 00a at t case = 125 c - 1.13 v r t on - state slope resistance C low level 500a to 2400a at t case = 125 c - 0.343 m ? on - state slope resistance C high level 2400a to 72 00a at t case = 125 c - 0.264 m ? t gd delay time v d = 67% v drm , gate source 30v, 10 ? - 3 s t r = 0.5s, t j = 25 c t q turn - off time t j = 125 c, v r = 200v, di/dt = 1a/s, - 1200 s dv dr /dt = 20v/s linear q s stored charge i t = 2000a, t j = 125 c, di/dt C 1a/s, 2800 6400 c i l latching current t j = 25 c, v d = 5v - 3 a i h holding current t j = 25 c, r g - k = ? , i tm = 500a, i t = 5a - 300 ma
semiconductor dcr2950w65 4 / 10 www.dynexsemi.com gate trigger characteristics and ratings symbol parameter test conditions max. units v gt gate trigger voltage v drm = 5v, t case = 25 c 1.5 v v gd gate non - trigger voltage at 50% v drm, t case = 125c 0.4 v i gt gate trigger current v drm = 5v, t case = 25 c 40 0 ma i gd gate non - trigger current at 50% v drm, t case = 125c 15 ma curves fig.2 maximum & minimum on - state characteristics v tm equation where a = 0.914146 b = - 0. 0 3808 v tm = a + bln (i t ) + c.i t +d. ? i t c = 0.00016 d = 0.015311 these values are valid for t j = 125 c for i t 500a to 7200a 0 1000 2000 3000 4000 5000 6000 7000 0.5 1.5 2.5 3.5 instantaneous on - state current i t - (a) instantaneous on - state voltage v t - (v) min 125 c max 125 c min 25 c max 25 c
semiconductor dcr2950w65 5 / 10 www.dynexsemi.com fig.3 on - state power dissipation C sine wave fig.4 maximum permissible case temperature, double side cooled C sine wave fig.5 maximum permissible heatsink temperature, double side cooled C sine wave fig.6 on - state power dissipation C rectangular wave 0 2 4 6 8 10 12 14 16 18 20 0 1000 2000 3000 4000 5000 mean power dissipation - (kw) mean on - state current, i t(av) - (a) 180 120 90 60 30 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 1000 2000 3000 4000 5000 maximum case temperature, t case ( o c ) mean on - state current, i t(av) - (a) 180 120 90 60 30 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 1000 2000 3000 4000 maximum heatsink temperature, t heatsink - ( o c ) mean on - state current, i t(av) - (a) 180 120 90 60 30 0 2 4 6 8 10 12 14 16 18 20 0 1000 2000 3000 4000 5000 6000 7000 mean power dissipation - (kw) mean on - state current, i t(av) - (a) d.c. 180 120 90 60 30
semiconductor dcr2950w65 6 / 10 www.dynexsemi.com fig.7 maximum permissible case temperature, double side cooled C rectangular wave fig.8 maximum permissible heatsink temperature, double side cooled C rectangular wave fig.9 maximum (limit) transient thermal impedance C junction to case ( c/kw) 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 1000 2000 3000 4000 5000 6000 7000 maximum permissible case temperature , t case - ( c) mean on - state current, i t(av) - (a) d.c. 180 120 90 60 30 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 1000 2000 3000 4000 5000 6000 maximum heatsik temperature t heatsink - ( o c) mean on - state current, i t(av ) - (a) d.c. 180 120 90 60 30 0 2 4 6 8 10 12 14 16 0.001 0.01 0.1 1 10 100 thermal impedance, z th(j - c) - ( c/kw) time ( s ) double side cooling anode side cooling cathode sided cooling 1 2 3 4 double side cooled r i (c/kw) 0.8816 1.2993 2.8048 1.3305 t i (s) 0.0106818 0.058404 0.3584979 1.1285 anode side cooled r i (c/kw) 1.5197 3.2398 5.7622 0.6312 t i (s) 0.0170581 0.2424644 6.013 15.364 cathode side cooled r i (c/kw) 1.4106 2.4667 6.7451 3.9054 t i (s) 0.0158344 0.1786951 3.6201 6.196 z th = ? [r i x ( 1-exp. (t/t i ))] [1] ? r th(j-c) conduction tables show the increments of thermal resistance r th(j-c) when the device operates at conduction angles other than d.c. double side cooling anode side cooling cathode sided cooling ? z th (z) ? z th (z) ? z th (z) ? sine. rect. ? sine. rect. ? sine. rect. 180 1.00 0.67 180 0.94 0.64 180 0.95 0.65 120 1.16 0.97 120 1.08 0.91 120 1.09 0.92 90 1.33 1.13 90 1.23 1.06 90 1.25 1.07 60 1.48 1.31 60 1.37 1.22 60 1.38 1.23 30 1.61 1.51 30 1.47 1.38 30 1.49 1.40 15 1.66 1.61 15 1.52 1.47 15 1.54 1.49
semiconductor dcr2950w65 7 / 10 www.dynexsemi.com fig.10 multi - cycle surge current fig.11 single - cycle surge current fig.10 reverse recovery charge fig.11 reverse recovery current 0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 0 5 10 15 20 25 30 rate of decay of on-state current, di/dt - (a/us) stored charge, q s - (uc) q s min = 3539.7*(di/dt) 0.5991 q s max = 7066.1*(di/dt) 0.4891 conditions: t j = 125 o c v rpeak ~ 3900v, v rm ~ 2600v snubber as apprpriate to control reverse volts 0 100 200 300 400 500 600 700 800 0 5 10 15 20 25 30 rate of decay of on-state current, di/dt - (a/us) reverse recovery current, i rr - (a) i rr min = 41.906*(di/dt) 0.8147 i rr max = 59.812*(di/dt) 0.7589 conditions: t j = 125 o c v rpeak ~ 3900v, v rm ~ 2600v snubber as apprpriate to control reverse volts
semiconductor dcr2950w65 8 / 10 www.dynexsemi.com fig12 gate characteristics fig. 13 gate characteristics 0 5 10 15 20 25 30 0 1 2 3 4 5 6 7 8 9 10 gate trigger voltage, v gt - (v) gate trigger current, i gt - (a) lower limit upper limit 5w 10w 20w 50w 100w 150w - 40c
semiconductor dcr2950w65 9 / 10 www.dynexsemi.com package details for further package information, please contact customer services. all dimensions in mm, unless stated otherwise. do not scale. clamping force: 76kn 10% lead length: 420mm lead terminal connector: m4 ring package outline type code: w fig.14 package outline device maximum thickness (mm) minimum thickness (mm) dcr1594sw28 27.34 26.79 dcr1595sw42 27.57 27.02 dcr1596sw52 27.69 27.14 dcr5450w22 27.265 26.715 dcr4910w28 27.34 26.79 dcr4100w42 27.57 27.02 dcr3640w52 27.69 27.14 dcr2950w65 27.95 27.4 dcr2450w85 28.31 27.76
semiconductor dcr2950w65 10 / 10 www.dynexsemi.com important information: this publication is provided for information only and not for resale. the products and information in this publication are intended for use by appropriately trained technical personnel. due to the diversity of product applications, the information contained herein is provided as a general guide only and does not cons titute any guarantee of suitability for use in a specific application . the user must evaluate the suitability of the product and the completeness of the product data for the application. the user is responsible for product selection and ensuring all safety and any warning r equirements are met. should additional product information be needed please contact customer service. although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical errors. the information is provided without any warranty or guarantee of any kind. this publication is an uncontrolled document and is s ubject to change without notice. when referring to it please ensure that it is the most up to date version and has not been superseded. the products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property. the user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failu re or malfunction. the products must not be touched when operating because there is a danger of electrocution or severe burning. always use protective safety equipment such as appropriate shields for the product and wear safety glasses. even when disconnected any electric cha rge remaining in the product must be discharged and allowed to cool before safe handling u sing protective gloves. extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. use outside the product ratings is likely to cause permanent damage to the product. in extreme conditions, as w ith all semiconductors, this may include potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. appropriate ap plication design and safety precautions should always be followed to protect persons and p roperty. product status & product ordering: we annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully appr oved for production. the annotations are as follows: - target information: this is t he most tentative form of information and represents a very preliminary specification. no actual design work on the product has been started. provisional information: some initial development work has been performed. the datasheet represents a view of the end product based on very limited information. certain details will change. preliminary information: the product design is complete and final characterisation for volume production is in progress.the datasheet represents the product as it is now understoo d but details may change. no annotation: the product has been approved for production and unless otherwise notified by dynex any product ordered will be supplied to the current version of the data sheet prevailing at the time of our order acknowledgement. all products and materials are sold and services provided subject to dynexs conditions of sale, which are available on reque st. any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their resp ective owners. headquarters operations dynex semiconductor limited doddington road, lincoln, lincolnshire, ln6 3lf united kingdom. phone: +44 (0) 1522 500500 fax: +44 (0) 1522 500550 web: http://www.dynexsemi.c om customer service phone: +44 (0) 1522 502753 / 502901 fax: +44 (0) 1522 500020 e - mail: power_solutions@dynexsemi.com ? dynex semiconductor ltd. technical documentation C not for resale .
|
